VentMaster K1 Pace Battery Powered Fire Rescue Saw
VentMaster Fire rescue saws deliver the absolute best in cutting performance, built specifically for the fire service. The VentMaster K1 Pace Fire Rescue Cutoff Saw has the power and performance you expect from equivalent gas-powered cutters. Ergonomic and user-friendly with low vibrations, optimally balanced and zero direct emissions.
Powered by Husqvarna PACE battery system with high power and fast charging for impressive performance and matched with Tempest’s specially designed battery blade range for maximized cutting depth and optimized performance.
POWERFUL BATTERY DRIVEN FIRE RESCUE SAW
Power and performance in par with equivalent gas-powered cutters. With an integrated gearbox for higher torque and maximum performance.
LIGHT AND PERFECTLY BALANCED
The centered placement of the blade provides increased stability and control. The lighter weight and reduced vibration produce a much smoother cutting experience for the operator.
HIGH POWER PACE BATTERY SYSTEM
Enables quick charging, high power and performance which maximizes efficiency and productivity.
BATTERY RUN TIME
A single, full battery charge is comparable to a tank of fuel on a gas saw.
X-HALT™ BLADE BRAKE
Stops a spinning blade in a fraction of a second for enhanced safety
TEMPEST PATENTED, TOOL-LESS “KIS-360” DEPTH GAUGE
Available only from Tempest, the patented KIS-360 depth gauge allows for precise adjustment and control of cutting depth with out the need for tools to adjust the cut depth.
BOTTOM ROLLER ASSEMBLY
Provides a resting place for the saw during long cuts giving the user better balance and control. The Bottom Roller Assembly helps reduces operator fatigue, especially when combined with KIS-360 Depth Gauge.
HIGH SPEED CUTTING
High speed revolutions at 11,640 ft/ minute (3548 m/ minute) for fast, smooth cutting
Specifications:
• Battery Type: Li-Ion
• Battery Voltage: 36 V
• Weight (excluding battery & cutting equipment): 16 lbs. / (7.4 kg)
• Product Height / Width: 25.5 in / 9.1 in. (648 mm / 233mm)
• Speed at max. power 11,640 ft/minute (3,548m/minute)
• Max. Cutting Depth 5.7 in. (145 mm cm)
• Max. Blade Diameter 14 in. (361 mm)
• Sound Level: 102 dB (at operators ear)
VentMaster All-Cut Rescue Diamond Blade: Diamonds are attached using a vacuum brazing process. Blade core features silicone carbine electroplating to reduce binding. This is our best “all purpose” blade suitable for cutting steel, rebar, ductile iron, cooper, wood fiber board, stucco, concrete, masonry, stone, brick, PVC piping and High Density Polyethylene (HDPE).
VentMaster Diamond Blade Diamonds are attached using a vacuum brazing process. Vacuum brazing is stronger under conditions of extreme heat. Blade is suitable for rescue & demolition work including iron pipe and security bars, steel doors and locks, vehicle bodies. This blade is not suitable for cutting wood products.
VentMaster Concrete Diamond Blade: Diamonds are attached using a laser welding process. Blade is designed for general concrete cutting, concrete pipe, and concrete walls.
VentMaster Ductile Iron Diamond Blade: Diamonds are attached using a vacuum brazing process. Blade Core features silicone carbide electroplating to reduce binding. Blade is designed to cut Ductile iron, Ccast iron, concrete pipe and reinforced concrete. Cutting reinforced concrete will cause excessive blade wear.
K1 Battery Powered Fire Rescue Saw Includes:
• Ventmaster K1 Pace Rescue Saw
• B380X Batteries (Qty. 2)
• C900X CHARGER (Qty. 1)
14” Blade Choices:
• All-Cut Rescue Diamond Blade
• Ventmaster Diamond Blade
• Concrete Diamond Blade
• Ductile Iron Diamond Blade